| Number of Switch: | Multi Control Switch |
|---|---|
| Protection: | IP53 |
| Certification: | CCC, RoHS, ISO9001, CE |
| Samples: |
Discussion
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
The switch is protected internally against interference by a safety device, however, particularly strong electromagnetic fields may alter its operation. Such interference can be avoided by adhering to the following recommendations during the installation:
The device should not be installed near inductive loads (motors, transformers, contactors, etc...).
- A separate power lin is recommended (equipped with a network filter if necessary).
Inductive loads should be equipped with interference suppressors (varistor, RC filter).
if the time switch is to be used in combination with other devices: it is necessary to verify that no parasitic disturbances will be caused by the group.
| Itemno | TB45 TB-180 |
| Operating Voltage | AC 110V/220V/240V 50-60Hz |
| Power Consumption | 2.5V |
| Contace Capasity | AC220V 16A |
| Contact Resistance | ≤50MΩ |
| Inaulation Resistance | ≥100MΩ |
| Operating Temperature | -25ºC~+70ºC |
| Accuracy | ≤2S/day 25ºC |
| Contact Capacity: Lamp load: 1000W Resistive | 1000W Resistive |
| load | 16A/250VAC(cosφ=1) |
| Inductive Load | 3A/250VAC(cosφ=0.6) |
| Working reserve time | 24hours charged can lasts 100 hours |
| Full Timing Range: | 24h |
| Stonage Battery | 150h |
| Minimum Setting Unit | 15 Minuters |
| Setup Times | 15Minuters/time 96Time |
| Dimension | 45X17.5X60mm |
| Installing Mode | DIN rail mounting |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}