··········This link price is only for GRV8-VW2··········
Product Description
Applications
-Used for overvoltage and undervoltage protection of electrical equipment.
-Monitor weak load carrying capacity or voltage signals that require isolation.
Function Features
-True RMS measurement with high measurement accuracy.
-Overvoltage and undervoltage selection monitoring or simultaneous monitoring.
-The output contact is normally open or normally closed and can be set.
-Two sets of contact outputs, which can act separately and independently.
-36mm wide, 35mm clamp rail installation.
Product Parameters
Function |
Monitoring voltage |
Supply terminals |
A1,A2 |
Rated supply voltage |
AC/DC24-240V 50/60Hz |
Monitoring voltage input terminal |
V1,V2,V3,C |
Monitoring voltage range |
AC/DC15V-600V50/60Hz |
Rated insulation voltage |
600V |
Hysteresis |
Only over or under:5%-20% adjustable;Over and under:fixed 3% |
Supply/Reset indication |
Green LED |
Measurement error |
≤2% |
Time delay |
0.1s-10s |
Power up delay/Reset time |
0.1s-10s |
knob setting accuracy |
10% |
Output |
2xSPDT |
Current rating |
5A/AC1 |
Switching voltage |
250VAC/24VDC |
Min.breaking capacity DC |
500mW |
Output indication |
Red LED |
Mechanical life |
5×10^6 |
Electrical life(AC1) |
5×10^4 |
Operating temperature |
-20ºCto+55ºC(-4°F to 131°F) |
Storage temperature |
-35ºCto+75ºC(-22°Fto158°F) |
Mounting/DIN rail |
Din rail EN/IEC 60715 |
Protection degree |
IP40 for front panel/IP20 terminals |
Operating position |
any |
Overvoltage cathegory |
III |
Pollution degree |
2 |
Max.cable size(mm²) |
solid wire max.1x2.5or 2x1.5/with sleeve max.1x2.5(AWG 12) |
Dimensions |
90mm×36mm×70mm |
Weight |
100g |
Standards |
IEC60947-5-1 |
Certifications
Packaging & Shipping
Company Profile