| Type: | Low-voltage |
|---|---|
| Structure: | Double-column Disconnector |
| Installation: | / |
| Samples: |
discussion
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product Overview
The purpose of the Manual Transfer Switch is to manually transfer power to analternate source.The most common application is transferring power from abackup power source to the load during utility failures.
When installed properly,the Manual Transfer Switch provides an easy means fortransferring loads to an alternate source in the event of another power sourcefailure.
Product Features
1.Manual Transfer Switch has a high voltage range of 1-600VAC.
2.Adequate durability has been ensured by testing against the IEC60947-3 standardin the specification of endurance requirements.
3.The manual transfer switch is operated via a handle fixed directly on the switch.The 16 to 63 Ampere sizes can be snapped-on to a DIN rail and the front fits inthe 45 mm consumer unit cut-out.
4.Clearly marked power postions with Indicator lights to easily understand whichpower source is being utilized.
5.Label window for easy and clear labeling of power sources.
| Rated Voltage | 230/400V |
| Rated Current | 63A |
| Rated Frequency | 50/60Hz |
| Number of Poles | 1P,2P,3P,4P |
| Indicator | 1-0-2(1=Main Power ON,O=OFF,2=Standby Power ON) |
| Indicator Window 1=Red,0=Green,2=Yellow(Customizable) | |
| Short Circuit Current | 1200A |
| Mechanical Life | 10000 Cycles |
| IP Rating | IP20 |
| Operating Temperature | -5ºC~50ºC |
| Cable Size | Max 10mm² |
| Mounting | DIN 35mm Rail |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}