| Customization: | Available |
|---|---|
| Theory: | Time Relay |
| Usage: | Control |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Applications
-It is used fordelayed switching of lights in the corridors,entrances,stairways,halls or for delayed finish of fans (WC,bathroom,etc.).
Feature
-Operating system switch:
ON-output is constantly ON.
AUTO-timing according to adjusting by potentiometer in range 0.5-20min
OFF-output is constantly OFF.
-Voltage range:AC 230 V,clamp terminals.
-Relay status is indicated by LED.
-1-MODULE,DIN rail mounting.
| Technical parameters | GRT8-LS |
| Function | delay off reacting to contact switching |
| Supply terminals | L-N |
| Voltage range | AC 230V(50-60Hz) |
| Power input | AC max.6VA/1.3W |
| Supply voltage tolerance | -15%;+10% |
| Supply indication | green LED |
| Time Ranges | AUTO:0.5-20min ON OFF |
| Time setting | potentiometer |
| Time deviation | 10%-mechanical setting |
| Repeat accuracy | 0.2%-set value stability |
| Minimum power time | 200ms |
| Glow tubes connections | Yes(N-3 or L-3) |
| Max. amount of glow lamps | 230V,max.75pcs(Measured with glow lamp 0.68mA/230V AC) |
| Temperature coefficient | 0.05%/ºC,at=20ºC(0.05%ºF,at=68ºF) |
| Output | 1×SPDT |
| Current rating | 16A(AC1) |
| Switching voltage | 250VAC/24VDC |
| Min. breaking capacity DC | 500mW |
| Output indication | red LED |
| Mechanical life | 1×107 |
| Electrical life(AC1) | 1×105 |
| Reset time | max.200ms |
| Operating temperature | -20ºC to+55ºC(-4ºFto131ºF) |
| Storage temperature | -35ºC to+75ºC(-22ºFto158ºF) |
| Mounting/DIN rail | Din rail EN/IEC 60715 |
| Protection degree | IP40 for front panel/IP20 terminals |
| Operating position | any |
| Overvoltage category | III. |
| Pollution degree | 2 |
| Max.cable size(mm 2) | solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12) |
| Tightening torque | 0.8Nm |
| Dimensions | 90×18×64mm |
| Weight | 61g |
| Standards | EN61812-1,IEC 60669-2-3,IEC60947-5-1 |
){kind=link}